10
Activation
• Press Power Switch
. All icons appear on the main
screen for 2 seconds. After 2 seconds, the standby
screen appears and the laser beam is activated.
Distance Measuring
To measure a distance:
• Aim at target and press
MEAS
. The measured distance appears on the main screen.
To change the units of measurement see Settings.
Standby Screen
Measurement Done
Adding Measure
ments
ץ
To calculate the sum of two measurements:
1. Take your first measurement.
2. Press to save the measurement.
3. Take a second measurement and press again.
The sum of the two measurements appears on the screen.
Subtracting Measurements
OPERATION
