OVERVIEW
Before installing your Wall Map(s), please read all the instructions and take
note of the following items:
Never STAND Wall Map(s) and Spring Roller on EITHER END during mounting
process: Note spring rollers are tensioned and tested to assure the highest
quality standards are maintained prior to shipping of your Wall Map(s). Wall
Map(s) must be stored in a horizontal position on any flat surface.
To prevent damage, use care when removing wrapping materials to avoid
cutting into Wall Map(s).
Wall Map(s) should NOT be pulled down beyond the point where full image is
displayed and/or the sticker stating DO NOT PULL PAST THIS POINT which is
applied to many of our Wall Map(s)
MATERIALS ENCLOSED WITH YOUR SHIPMENT
The box received contains your Wall Map(s) mounted to a spring roller, a
backboard (long metal rail), and side brackets (2) with hardware to mount these to
backboard.
TOOLS REQUIRED FOR INSTALLATION
7/16” Racket and/or
Open End Wrench
Measuring Tools
Marker /
Pencil
Drill and Drill-bits
Ladder or Scaffolding
Screw Driver
Level
Screws and/or
Screws with Anchors
ATTACHING WALL MAP(S) AND ROLLER TO BACKBOARD
Carefully remove the tape and packing paper that is wrapped around the Wall
Map(s) and spring roller adhering it to the backboard. (NOTE: leave paper and
tape wrapped around Wall Map(s) and spring roller at this time)
