Aegis2.2x Installation Manual
4
The supported model for running
License Server Mode
, as shown below, is to use a separate server
(this can be a shared server) for the location of the
Aegis License Service
,
Management Console
, and
HASP
key. All workstations in this installation would then be configured to receive authorization for the
program and approval for access to any external equipment working with Aegis2 from the server running
the
Aegis License Service
.
In such an installation, the server will need to have an accessible USB port for the HASP key. Virtual
ports can be used, but it is the responsibility of the client to configure the software and have the virtual
port working prior to the installation of the
Aegis License Service
.
Additionally, all workstations need to be configured and have network access to the
Aegis License
Service
on the server, as well as have any necessary permissions that may be needed to access the
server.
