Scanning the server for viruses
51
6. This will open the
Change task settings
window (see Figure 24),
the tabs of which contain the settings of the task selected in the
previous window. To apply these settings to the whole batch of
tasks from the Snapin for ConsoleOne, check the
Save
checkbox in
the lower part of window on each of the tabs. If you are using the
web management interface, check the box located near the name of
the relevant tab.
After this, the fields on the tabs become available for editing and
their values can be set the same for this batch of tasks. Make the
desired changes and click on
Apply
or
OK
to save the settings.
Figure 24. The
Change task settings
window. Batch task setting
As a result, the settings you have made will be saved for the whole batch
of tasks. A common log will be shared by these tasks. You can change
the tasks schedule on the
Schedule
tab individually for each task (see
section A.4 on page 78).
6.4. Starting/stopping a task
Tasks can be started and stopped automatically according to the scheduler
settings, or manually, using the Snapin for Novell ConsoleOne or web interface.