4
5
Let’s get to work.
Preparing the Vehicle
1.
Whether you’re starting from a
factory rear, or with existing KAON
accessories, we need to start from
a blank slate. Remove the rear grab
handles by prying open the plastic
cover and removing the bolts
with a socket.
Installing the
Molle Panels
2.
Ensure you have the correct panel
for each side. The ‘K’ on each panel
should be oriented at the front of
the vehicle.
3.
Now is the easiest time to attach
any accessories such as pouches,
electrical components, or storage
pods to your Molle Panels.
Thread the handle mounts over the
rear grab handles, ensuring molles
are oriented as pictured.
If you’re installing with a
Standalone Shelf: their handle
brackets should be sandwiched
between the Molle Panel and factory
handles at this stage.
If you’re installing with a
Barrier and/or Barrier Shelf:
their handle brackets should be
sandwiched between the Molle
Panel and factory handles at
this stage.
Shelf Brackets should be layered
over the Molles, and Barrier
Handle Brackets last, paying
attention to the correct orientation
as per their instructions.
4.
Secure using the factory handles
and hardware. Tighten the bolts to
secure and reclip the plastic cover.
1
1
3
5
4
