11
St
at
u
s
(Se
curi
ty)
7
Status
(Security)
You set the account information to enable to access to the
equipment.
1
5
2
3
4
12
Sp
ec
tr
u
m
An
aly
zer
(DS/US)
8
Spectrum Analyzer (DS/US)
Spectrum Analyzer enables the technicians to configure
an interactive GUI to understand about characteristics on
the CM, it works normally as they utilize a regular
spectrum analyzer.
1
● Main Control
2
- PRESET button : Resets all the settings back to its default values.
3
- HOLD button : Stops the spectrum analyzer from running.
4
- RUN button : Starts the spectrum analyzer.
5
● Settings
-
FREQUENCY : Specifies the frequency (center, start, or stop) to monitor
in terms of Hz.
- SPAN : Specifies how wide of a span to view in terms of Hz.
- AMPLITUDE : Sets the reference level (offset) of the input signal.
- BW : Bandwidth
- MEASUREMENTS
1
Type
http://192.168.100.1
:8080
on your web browser address bar.
2
Click ‘RUN” button to run spectrum analyzer.
1
Click “Status” menu on “Status” page.
2
Input userID.
3
Input new password on New Password text box and input the equal one to
Re-Enter New Password text box.
4
Input the password of current user ID to get the user authentication.
5
Click ”Apply” button to setthe information to be applied.
