25
Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
9) PPP Password
User can enter the password for the PPPoE to activate the network service. When the user enters the correct PPP
user name and PPP password, this CPE get authenticated by the PPP server and the internet service will be activated.
10) PPP Service Name
User can make a name for this new PPP service entry.
11) PPP Authentication Method
It shows the PPP authentication method consists of Auto, PAP, CHAP, and MSCHAP.
12) Apply
When the user click “Apply” button, all the configurations the user configured will be applied to the CPE and a new
WAN service entry will be added to the below table.
13) Server
It shows “the PPPoE Service name” a user entered in the configuration page.
14) User
It shows “the User name” the user entered in the configuration page.
15) Auto
It shows which “PPP authentication method” is used.
16) IP extension
It shows whether PPP IP Extension is enable or disabled.
Static IP
It shows whether static IP provision service is enabled or disabled.
IPv6
It shows whether IPv6 service is enabled or disabled.
17) Remove
User can remove this WAN configuration entry.
18) Add
When user click “Add” button, the user can configure another WAN service.
13
14
15
16
17
18
Summary of Contents for AR2146
Page 2: ......
