background image

15A

Limited Warranty To Original Purchaser

Kanto Distribution Inc . (Kanto) warrants the equipment it manufactures to be free from defects in material 

and workmanship for the following limited warranty period of:

24 months parts and labour

If equipment fails because of such defects and Kanto or an authorized dealer is notified within 24 months 

from the date of shipment with proof of original invoice .  Kanto will, at its option, repair or replace the 

equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse 

or modifications . Equipment that fails under conditions other than those covered will be repaired at the 

current price of parts and labor in effect at the repair . Such repairs are warranted for 90 days from the day 

of reshipment to the original purchaser . This warranty is in lieu of all other warranties expressed or implied, 

including without limitation, any implied warranty or merchantability or fitness for any particular purpose, all 

of which are expressly disclaimed . 

The information in the owner’s manual has been carefully checked and is believed to be accurate . However, 

Kanto assumes no responsibility for any inaccuracies that may be contained in the manual . In no event will 

Kanto, be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect 

or omission in this manual, even if advised of the possibility of such damages .

Warranty

www.kantoliving.com | [email protected]

Tel 888.848.2643

To learn more about all our products, visit 

www.kantoliving.com

 

• Check out our full line of bookshelf and desktop speaker systems

• Available in a stunning array of colors

Kanto Speakers

• Full line of Audio and Video Cables

• White or Black Cables available

• HDMI, Optical, Mini-jack, RCA, USB

• Switchers, Hubs, and Adapters

• Visit kantoliving.com/products/cables

• Visit kantospeakers.com for more! 

by

Kanto Living

@kantoliving

kantoliving

U

Check out more great products from Kanto!

Summary of Contents for YUMI POWERED SPEAKER













Reviews: