9
Supporting your digital lifestyle
™
USB Charging Operation
YU5 features one 5 V 2 .1 A USB charging port on the back panel . This is a convenient power
source to charge your devices .
When YU5 is in Playback Mode (LED blue) and Standby Mode (LED yellow), the port is active,
and whatever device is connected is able to draw up to 2 .1 A of power .
Bluetooth Operation
1 . We recommend keeping a maximum distance of 10 meters between the speaker and your
device . The best signal fidelity is within this range .
2 . If pairing is successful, the connection between the speaker and your device remains active
and functional – that is, you can stream audio from your device to the speaker using either
the player control buttons of your device or the control buttons of the remote control (see
diagram of Remote Control on page 5 of this manual – buttons #20, #21, and #22) .
3 . Take note of the following behavior and functionality during Bluetooth operation . When
you are successfully connected, the Bluetooth LED will be lit solid, and your device will
show as connected to ‘YU5 by Kanto’ .
• The connection between speaker and device remains active even if input source has
changed . For instance, you can switch to another input source (e .g . CD player) and
return to Bluetooth operation without losing signal connection and, therefore, do not
need to pair with the device again .
• When the speaker is put in Standby mode or powered OFF, Bluetooth connection
with the device is lost . When the speaker returns to Playback mode, the Bluetooth
connection between the speaker and device is re-established . However, you may notice
a choppy playback signal for approximately 30 seconds after reconnection . It will
normalize .
• While the speaker can be paired with more than one device, only one device can play
and transmit audio signal at a time .
4 . The YU5 remote control features a Bluetooth Reset button to quickly disconnect a paired
device and allow a second device to pair with the speaker (button #7 on the Remote
Control diagram on page 5) .
• Press Bluetooth Reset button to disconnect a paired device .
• Follow the pairing instructions to pair another device .
• The same behavior and functionality apply to the second device .
