background image

Supporting your digital lifestyle

Step 2: Mount Wall Plate

Wood Stud Wall

The Wall Plate must be mounted to two wood studs. Use 

a stud sensor to locate the two studs, clearly marking 

the outer edges of the studs (see Diagram B). Use a long 

level to ensure the two holes are level at the desired 

height. 

Pre-drill two upper holes in the center of your studs, and 

attach the Wall Plate to the wall using 2 Lag Bolts 

(L)

 and 

Lag Bolt Washers 

(I)

 (see Diagram B). Do not over-tighten 

lag bolts 

(L)

. Make sure the Wall Plate is 

fl

 at against the 

wall surface. Using the Wall Plate as template, pre-drill 

the bottom 2 holes, and secure using 2 Lag Bolts 

(L)

 and 

2 Lag Bolt Washers 

(I)

, taking care not to over-tighten.

Brick or Concrete Wall

Using the Wall Plate as a template, mark four holes 

toward the outer edge of the Wall Plate at your desired 

height (see Diagram C). Adjust the Wall Plate position to 

be clear of mortar joints, keeping in mind that the mount 

provides minor horizontal shift along the length of the 

Wall Plate. Use a long level to ensure the four holes are 

level and at the desired height. 
Pre-drill four holes, and insert a Concrete Anchor 

(M)

 

into each of the holes 

fl

 ush with the concrete wall 

surface and not 

fl

 ush with the surface covering, such as 

drywall. 
Attach the Wall Plate using 4 Lag Bolts 

(L)

 and Lag Bolt 

Washers 

(I)

 (see Diagram C). Make sure the Wall Plate 

is 

fl

 at against the wall surface. Do not over-tighten 

Lag Bolts 

(L)

.

CAUTION

 

Make sure the supporting surface will support 

the load limits outlined in the Caution at bottom 

of page two. Tighten Lag Bolts until the Wall Plate is snug 

fl

 at against the wall. Do not over tighten Lag Bolts (

L

). 

Each Lag Bolt must be located in the center of a wood 

stud.

CAUTION

Make sure the concrete or brick wall is at least 

3.5” thick. Make sure the anchor is seated completely 

fl

 ush with the concrete surface even if there is another 

layer of material, such as drywall. If drywall is over 5/8” 

thick custom lag bolts must be used. Concrete must be 

a minimum of 2000psi in density.

Diagram B

Diagram C

Wood Concrete

3/16” 

(5

mm)

3” (75

mm)

3” (75

mm)

7/16”

(11mm)

Attach the two plastic end caps (

O

) to the Wall Plate.

Supporting your digital lifestyle

5

Summary of Contents for T3760









Reviews: