7
Connecting Audio Sources
Connecting a Turntable
Use the appropriate audio cable to connect your audio source components to your speakers.
•
3.5 mm stereo mini-jack AUX cable
•
Stereo RCA cable
•
Optical Toslink cable
SYD supports data streams up to 24-bit/96 kHz resolution via Optical Toslink.
SYD features a built in Phono Pre-Amp that allows you to connect directly to a
turntable.
•
connect your turntable to the RCA L/R inputs on the back of the SYD
•
connect your turntable’s grounding wire to the grounding post (not all
turntables feature a ground wire)
•
If your turntable does not have a built in Phono Pre-Amp, use the
“Phono” setting.
•
If your turntable has a built in Phono Pre-Amp, use the “Line” setting.
ATTENTION
Some models of turntables include a built-in Phono Pre-Amp. If your turntable has a built in
Phono Pre-Amp, DO NOT use the Phono setting. Doing so will void your warranty and could
cause severe damage to your speakers.
Sub Out
L
R
RCA
RCA
USB Charge
5V/1000 mA
ON
OFF
POWER
AUX
OPT
GND
RCA
AUX
OPT
RCA
Phono
Line
