6
Supporting your digital lifestyle
™
Setting Up Your Speaker
SYD is designed to perform optimally positioned at least 8” from the rear wall in an average
listening room. However, it may not be possible to install the speaker in this position and since
rooms vary in shape, size, and furnishing, a certain amount of experimentation is necessary to
determine the most suitable position.
Moving the speaker very close to the rear wall will enhance the bass frequencies but will tend to
reduce soundstage depth, while moving the speaker away from the rear wall will tend to have
the opposite effect. Avoid positioning the speaker close to or in the corner of a room, as this
will excite undesirable room coupling in the low and middle frequencies. Room characteristics
and positioning have a profound effect on the performance of the speakers, so time and effort
devoted to achieving the optimum positions will be rewarded.
Ensure that the ON/OFF Switch is in the OFF position.
Follow the instructions on the ensuing pages to connect your audio sources to SYD.
Connect the power cord from SYD to the wall outlet.
ATTENTION
When connecting audio cables the ON/OFF Switch must be turned OFF. After connecting all cables, the unit can be
turned ON.
When the volume is high, this system can produce noise levels that could permanently damage your hearing.
SYD is a self-powered speaker system. Do not connect the speaker inputs to the outputs of a stereo amplifier.
Damage may occur. Use only the power cord provided with the speakers.
OPT1
Sub Out
L
R
RCA
RCA
USB Charge
5V/1000 mA
GND
ON
OFF
POWER
AUX
