Introduction
2
Thank you for choosing a Kanto AV Systems speaker stand. Each SP130 will hold a speaker
weighing up to 30 lbs (13.6 kg) at 27.5” (70cm) off the ground to deliver ideal acoustically
isolated sound. Each stand features four adjustable-height, knurled pin-point isolation feet
for use in carpeted rooms, and optional floor plates to use on solid surfaces.
Read these instructions fully before assembly of this stand. Make sure there are no
defective or missing parts. Do not use defective parts. If you are uncertain whether the
part is defective call Kanto AV Systems at 1-888-848-2643 or email [email protected].
Kanto AV Systems can not be liable for property damage or injury caused by incorrect
assembly or use of this product.
Supplied Parts and Hardware
A: M8 x 25mm
flange bolt
B: M8 x 35mm
bolt
C: M8
washer set
D: Pin-point
Isolation Feet
I: Speaker Plate
x4
E: Floor
Plates
J: Glass Base
K: Tube
F: Rubber
Feet
G: Large
Rubber Pads
H: 5mm
Allen Key
x4
x4
x4
