4
Step 1: Attach Metal Frames to Wood Ends
Step 1.1
Attach Bottom Frame Loosely
Stand the wooden ends up, and position the bottom
frame (
J
) to align the holes with the inset nuts on one
wooden end (
E
). Insert two M6 x 32mm bolts (
A
) through
the frame’s holes and tighten approximately halfway.
Repeat for the other wooden end (
E
).
Step 1.2
Attach Middle Frame Loosely
Choose the location of your middle shelf based on your
AV components. Position the middle frame (
I
) to align
the holes with one of the three sets of inset nuts on one
wooden end (
E
). Insert two M6 x 32mm bolts (
A
) through
the frame’s holes and tighten approximately halfway.
Repeat at the same height for the other wooden end (
E
).
Step 1.3
Attach Top Frame Loosely
Position the top frame (
H
) to align the holes with the inset
nuts on one wooden end (
E
). Insert two M6 x 32mm bolts
(
A
) through the frame’s holes and tighten approximately
halfway. Repeat for the other wooden end (
E
).
Step 1.4
Tighten the Bolts
Use the Allen Key (
D
) to tighten all 12 bolts.
Diagram A
Assemble the Oasis structure using the three metal frames, two wooden ends and 12 M6 bolts, as shown in Diagram A.
Ensure that you orient the angled braces and the two holes on each frame towards the back of your Oasis.
A
(x12)
J
I
H
E
E
