Step 3: Trim Quick Releases
The KT1937 arms feature plastic quick
releases that are used if you want to remove
your television from the mount in future.
So that they do not hang below the bottom
of your television, you should push the
plastic release up through the quick release
arm, then trim the top of it so that it does
not interfere with the latching mechanism, as
shown in Diagram D
.
When you pull down on the quick releases,
they will latch into an open position. You
must push them back into the released
position before attaching the TV to the
wallplate.
CAUTION
Read this section carefully prior to install.
WARNING
Use two people to lift and position the TV onto the Wall Plate.
Diagram D
6
Diagram E
Ensure that the quick release
latches are in the released
position.
With the TV
brackets firmly secured to
the TV, use two people to
lift the TV into position and
hook the TV brackets onto
the wall plate, as shown in
Diagram E.
Allow the bottom of the TV
to swing towards the wall,
and the latching mechanism
will click into place at the
bottom of the wall plate.
Step 4: Attach TV to Wall Plate
