Tel.: 1 (450) 444 2030
•
Toll Free: 1-888-222-1560
•
Fax: 1 (450) 444 2029
•
InternetDN1781-1112
Copyright © 2008 Tyco International Ltd. and its Respective Companies. All Rights Reserved.
•
Specifications may change without notice.
Kantech and the Kantech logo are trademarks of Tyco International Ltd. and its Respective Companies.
KT-MOD-OUT16
KT-400 Expansion Module 16-Output with SPI Cable Install Sheet
3.4. Check the power jumper JP1 position. Put it on EXT if you
need external power or INT if no external power is required.
3.5. Applying Power
After all wiring is completed, connect the 16 VAC to the KT-400.
Connect the battery leads to the battery, and then apply power to
the AC transformer.
Note: Do not connect the power until all wiring is complete.
This module provides access point control (5) as per EN50133-1.
Certified by Telefication under the requirements of EN50133-1. and
EN50130-5 Class II.
Terminal Connections
Module no.: _______________________________________________________________________________________
Date of installation: ________________________________________________________________________________
KT-400 Name: _____________________________________________________________________________________
KT-400 SITE NAME: ________________________________________________________________________________
KT-400 Serial Number: ______________________________________________________________________________
AUX: ____________________________________________________________________________________________
SPI BUS (FROM): __________________________________________________________________________________
SPI BUS (TO): _____________________________________________________________________________________
O1:
O9: __________________________________________
O2:
O10: _________________________________________
O3:
O11: _________________________________________
O4:
O12: _________________________________________
O5:
O13: _________________________________________
O6:
O14: _________________________________________
O7:
O15: _________________________________________
O8:
O16: _________________________________________
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Kantech could void your authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the manufacturer’s instructions, may cause interference to radio and
television reception. It has been type tested and found to comply with the limits for Class B device in accordance with the specifications in Subpart “B” of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in any residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to television or radio reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the FCC helpful: “How to
Identify and Resolve Radio/Television Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received including interference that may cause undesired operation.
This class B digital apparatus complies with Canadian ICES-003.
The KT-400 is also compliant with EN55022: Class B.
D29008295R001
