FUNCTION
A Kant pressure switch type 602/652 has an integrated electric changeover switch. When pressure is applied, a diaphragm is deformed or a piston
is displaced via a lifting movement. The deformation or displacement is dependent on an adjustable spring preload. When the switching point is
reached, the diaphragm or piston has undergone a defined movement which actuates the switch and opens or closes an electrical circuit. Specific
pressure values can be monitored via the switching signal.
TECHNICAL DATA
Pressure switch with changeover switch
Flat connector 6,3 DIN 46244
Wrench size 27 Installation height
without connector 51mm
Thread length 9mm
Optionally with device connector
600/601 PG 9 with strain relief
Plug connector 6x60° pivotable
The function Open, Close or Change refers to rising pressure
DESIGN OF THE PRESSURE SWITCH
Device connector 600
Device connector 601
