11
8888----2 Position of the presser foot and foot lift
2 Position of the presser foot and foot lift
2 Position of the presser foot and foot lift
2 Position of the presser foot and foot lift
The presser foot should not touch the needle.
Adjustment is made by loosening screw A and then
moving the presser foot to the right or left.
■
Foot lift
Fit the collar onto the bushing with the presser foot
9mm above the top surface of the needle plate.
Then tighten screw B.
【
9
】
ADJUSTING THE STITCH FORMATION
9999----1 Adjusting the looper thread eyelets
1 Adjusting the looper thread eyelets
1 Adjusting the looper thread eyelets
1 Adjusting the looper thread eyelets
Align the eyes on the looper thread eyelets A with
the center line of the shaft. Adjust looper thread
eyelets A according to sewing conditions such as the
fabric or thread to be used by loosening screws B.
To increase the amount of the thread to be supplied,
move the eyelets backward. To decrease the
amount of the thread to be supplied, move the
eyelets frontward. Thread guide C should be
6~7mm above the guide plate. Adjustment is
made by loosening screw D.