24
Setting and Storing the Temperature Unit
Select [2.Temp(Temperature)] and press button to display the list
of [
℃
] and [°F].
The currently selected unit is highlighted in white as shown in the
lower right figure.
Press
▲
or
▼
to select the unit and press to store the setting of
the unit.
Pressing will cancel the setting and go back to the previous screen.
Setting and Storing the Atmospheric Pressure Unit
Select [3.Atmos (Atmospheric Pressure)] and press button to
display the list of [kPa] and [inHg]. The currently selected unit is
highlighted in white as shown in the lower right figure.
Press
▲
or
▼
to select the unit and press to store the setting of
the unit.
Pressing will cancel the setting and go back to the previous screen.
Setting and Storing the K-Factor
Select [4.K factor] and press button to display the [K factor]
setting.
Press to store the setting value.
Press to cancel the change of the settings and to go back to the
previous screen.
What is "K factor"?
A measured value shall be multiplied by the K factor, which is set
here. The result of the multiplication will be displayed and stored as
airflow value.
Use 1.000 for normal measurements.
Summary of Contents for TABmaster Mini
Page 1: ...TABmaster Mini Model 6750 User s Manual...
Page 30: ...30...
