Kanomax DALT 6900 Operation Manual Download Page 20

 

20 

Duct Air Leakage Tester Operation Manual Ver.3 

 

 

6 Warranty and Service 

6.1. Product Warranty 

The  limited warranty  set forth  below is  given  by  KANOMAX GROUP  COMPANIES  with respect to the 

KANOMAX  brand  Duct  Air  Leakage  Tester  and  other  accessories  (hereafter  referred  to  as  “PRODUCT”) 
purchased directly from KANOMAX GROUP COMPANIES or from an authorized distributor.   

Your PRODUCT, when delivered to you in new condition in its original container, is warranted against defects 

in materials or workmanship as follows: for a period of two (2) year from the date of original purchase, defective 
parts  or  a  defective  PRODUCT  returned  to  KANOMAX  GROUP  COMPANIES,  as  applicable,  and  proven  to  be 
defective upon inspection, will be exchanged for a new or comparable rebuilt parts, or a refurbished PRODUCT as 
determined  by  KANOMAX  GROUP  COMPANIES.  Warranty  for  such  replacements  shall  not  extend  the  original 
warranty period of the defective PRODUCT. 

This limited warranty covers all defects encountered in normal use of the PRODUCT, and does not apply 

in the following cases: 
(1)

 

Use of parts or supplies other than the PRODUCT sold by KANOMAX GROUP COMPANIES, which cause 
damage to the PRODUCT or cause abnormally frequent service calls or service problems. 

(2)

 

If any PRODUCT has its serial number or date altered or removed. 

(3)

 

Loss  of  damage  to  the  PRODUCT  due  to  abuse,  mishandling,  alternation,  improper  packaging  by  the 
owner,  accident,  natural  disaster,  electrical  current  fluctuations,  failure  to  follow  operation, 
maintenance or environmental instructions prescribed in the PRODUCT's operation manual provided by 
KANOMAX GROUP COMPANIES, or service performed by other than KANOMAX GROUP COMPANIES. 

NO  IMPLIED  WARRANTY,  INCLUDING  ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A 
PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED 
WARRANTY  STATED  ABOVE,  AND  NO  OTHER  EXPRESS  WARRANTY  OR  GUARANTY,  EXCEPT  AS  MENTIONED 
ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND KANOMAX GROUP 
COMPANIES. KANOMAX GROUP COMPANIES SHALL NOT BE LIABLE FOR LOSS OF STORAGE CHARGES, LOSS 
OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY 
THE  USE  OR  MISUSE  OF,  OR  INABILITY  TO  USE,  THE  PRODUCT,  REGARDLESS  OF  THE  LEGAL  THEORY  ON 
WHICH  THE  CLAIM  IS  BASED,  AND  EVEN  IF  KANOMAX  GROUP  COMPANIES  HAS  BEEN  ADVISED  OF  THE 
POSSIBILITY OF SUCH DAMAGES.IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST KANOMAX GROUP 
COMPANIES  BE  GREATER  IN  AMOUNT  THAN  THE  PURCHASE  PRICE  OF  THE  PRODUCT  SOLD  BY  KANOMAX 
GROUP  COMPANIES  AND  CAUSING  THE  ALLEGED  DAMAGE.WITHOUT  LIMITING  THE  FOREGOING,  THE 
OWNER  ASSUMES  ALL  RISK  AND  LIABILITY  FOR  LOSS,  DAMAGE  OF,  OR  INJURY  TO  THE  OWNER  AND  THE 
OWNER'S  PROPERTY  AND  TO  OTHERS  AND  THEIR  PROPERTY  ARISING  OUT  OF  USE  OR  MISUSE  OF,  OR 
INABILITY  TO  USE,  THE  PRODUCT  NOT  CAUSED  DIRECTLY  BY  THE  NEGLIGENCE  OF  KANOMAX  GROUP 
COMPANIES.  THIS  LIMITED  WARRANTY  SHALL  NOT  EXTEND  TO  ANYONE  OTHER  THAN  THE  ORIGINAL 
PURCHASER OF THE PRODUCT, OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES THE 
PURCHASER'S EXCLUSIVE REMEDY. 

6.2. After service 

 

When  you  have  a  problem with your  instrument,  please  check out  the “Common  Trouble  Shooting” 
section first. 

 

If that does not help, please contact your local distributor, or contacts on the last page. 

Summary of Contents for DALT 6900





























Reviews: