background image

 

 

Caution.

 

The symbols for warning mentioned in this manual are defined below:

 

symbols classifications

 

Danger: 

To Prevent Serious Injury or Death

 

      Warnings in this classification indicate a danger that may result in serious injury or death if not observed.

 

Caution: 

To Prevent Damage to the Product

 

Warnings in this classification indicate a risk of damage to the product that may void the product warranty if not 

observed.

 

  Description of Symbols

 

 

This  symbol  indicates  a  condition  that  requires  caution  (including  danger).  The  subject  of  each  caution  is 

illustrated inside the triangle .

 

 

This symbol indicates a prohibition. Do not take the prohibited action shown inside or near this symbol. 

 

 

This symbol indicates a mandatory action. A specific action is given near the symbol.

 

 

       

WARNING 

 

 

 

Heated forbidden

 

 

Never  bring  the  fabric  hood  to  a  flammable  gas 

atmosphere.

 

 

 

otherwise, the heat may cause a fire or explosion.

 

 

 

 

 

Disassemble 

prohibition

 

 

Do not disassembly or refit the instrument.

 

 

 

otherwise, may cause the electric shock or a fire.

 

 

 

 

Using properly 

 

Using properly under the instruction manual.

 

 

 

otherwise, may cause sensor damaged or an electric shock even a fire.

 

 

 

 

Using properly

 

 

If abnormal smells, noises or smoke occur, or if liquid enters the instrument, pull out 

the  AC  adapter  and  remove  the  batteries  immediately.  Then  send  it  to  the 

maintenance Dept. of KANOMAX for after service.

 

 

or, there is possible of an electric shock or a fire or instrument malfunction.

 

 

 

 

Forbidden

 

 

Do  not  expose  the  fabric  hood,  base  and  the  instrument 

noumenon in the rain.

 

 

otherwise,  may  cause  an  electric  shock,  an  fire  and  an 

person injure.

 

 

 

 

 

Summary of Contents for 6700





















Reviews: