INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 AP-H
PAGE 108
JUL 24/2013
7. Activation
A. Standby mode for automatic activation
In order to be automatically activated by the crash sensor, the ELT must be in
standby mode. This mode is mandatory during the flight. We recommend to
switch the ELT off only when the aircraft is parked for a long period or for a
maintenance operation.
• Check that the antenna is correctly connected.
• Switch to " ARM".
To operate the ELT with the Remote Control Panel, ensure that:
• The ELT switch is in the "ARM" position.
B. Manual activation as fixed ELT
• Check that the external antenna is correctly connected.
• Switch to " ON " (either on the ELT or on the Remote Control Panel):
- The ELT starts with the self-test sequence.
- 121.5 / 243 MHz transmission starts immediately after the self-test.
- 406 MHz starts after 50 seconds (406 burst every 50 sec during 24
hours).
- During transmission, buzzer operates and visual indicator flashes.
C. Manual activation as survival ELT
The KANNAD 406 AP-H can be used external the aircraft in survival version. A
tether is used to fix the transmitter to a liferaft in case of ditching.
ANT
ARM
OFF
ON
RC
ANT
ARM
OFF
ON
RC
ON
ANT
ARM
OFF
ON
RC
OFF
1
3
4
5
6
2
Antenna
2
RCP
