User manual WC
Page
19 of 20
14 EMC Information
The WarmCloud fulfils the applicable requirements of IEC 60601-1-2:2014 Electromagnetic
compatibility (EMC).
The WarmCloud shall be used in a hospital environment, but not close to HF surgical equipment or
MR cameras.
WARNING: Use of accessories and cables other than those specified or provided by the
manufacturer of this equipment could result in increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper operation.
WARNING: Portable RF communications equipment (e.g. mobile phones, radio transmitters,
antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any
part of the WarmCloud 2, including cables specified by the manufacturer. Otherwise, degradation of
the performance of this equipment could result.
NOTE: The EMISSIONS characteristics of this equipment make it suitable for use in industrial areas
and hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11
class B is normally required) this equipment might not offer adequate protection to radio-frequency
communication services. The user might need to take mitigation measures, such as relocating or
re-orienting the equipment.
For further information about EMC compliance with the specified emissions and immunity standard,
test levels, etc. please contact Kanmed.
