8
Insert the SATA HDD/HDD Bracket assembly into the housing. When correctly inserted, the
9.
screw holes on the bottom of the HDD Bracket will align with the screw holes on the bottom of
the housing.
Use the two screws that you removed during Step 1 to fasten the SATA HDD/HDD Bracket
10.
assembly to the housing.
Replace the Backplate. The SATA connection ports on the Backplate should hook up with the
11.
SATA connectors on the SATA HDDs.
caution
! Make sure that the cable connected to the
Backplate does not get caught between the SATA connectors.
Fasten the Backplate using the two screws that you removed during Step 3.
12.
Congratulations, you have successfully assembled your Kanguru QSX! Please refer to your User
Guide for detailed information on using your QSX.
Assembling Your Kanguru QSX
figure 10: Inserting the SATA HDD/HDD Bracket assembly
figure 11: Fastening the SATA HDD/HDD Bracket assembly to the housing
figure 12: Replacing the Backplate
