The Kanguru Presentation Mouse Quick Start Guide 2
Changing the Remote’s ID:
If your remote is note working or you are experiencing interference
with another remote in the area, please follow these instructions:
1. Press and hold the
Mode Button
and the
Composite
Switch
simultaneously for at least 5 seconds. The Mode
Button will flash green to change to a new ID.
2. Use a paperclip to press the Receiver Reset Button on the
RF Receiver.
3. Push the Left or Right Mouse Buttons on the remote to
activate the new ID.
Additional Troubleshooting Notes:
1. If you remove or replace the battery and your Remote
doesn’t work, repeat steps 1-3 above to activate a new ID.
2. The Media Functions are currently not supported in the Mac
OS.
3. The Laser pointer will turn off automatically after 30 seconds
of non-use.
4. Media mode turns off after 10 minutes of non-use.
5. In Windows 98/98SE you need to install a driver to access
the Flash Memory in the RF receiver.
Tech Support:
If you experience any problems installing your Kanguru Presentation
Mouse or have any technical questions regarding any of our
products, please call our tech support department. Our tech support
is free and available Monday through Friday, 9am to 5pm EST.
Call 1-508-376-4245 or
Visit our website at
http://www.kanguru.com