13
2.4 Logging into KDMDT
After you have completed the Setup Wizard, anytime you run KDMDT you will be required to login
using your security password. You need to provide the correct security password in order to access the
Defender DualTrust’s secure partition.
When the login screen appears:
1. Enter your password in the
Password
field.
2. Click on the
Login
button.
caution!
If you enter your password incorrectly too many times in a row (seven is the default setting
but it may be different depending on your setup), for security purposes any data stored on the secure
partition will be erased. All secure browser data, including bookmarks, downloads, configuration, etc.,
will also be erased. You will be issued an on screen warning when you have one attempt remaining, to
prevent accidental erasure. To cancel the login process, click on the
cancel
button. Unplugging and then
reinserting your drive or manually running KDMDT again will bring the login window back.
Once you have successfully logged in to KDMDT, the secure partition will be accessible through My
Computer or Windows Explorer and the DualTrust secure browser will launch.
caution!
Once you have logged into KDMDT, you should never disconnect your device without first
closing KDMDT properly by clicking the taskbar icon and selecting
Unmount Kanguru Defender
as
described in section 3.2
Removing Your Defender DualTrust
on page 23.
resetting from the Login screen
In the event you have forgotten your password, you can use the Reset to Factory Default function to
reset your password.
caution!
Using the Reset to Factory Default function will format and wipe all
data off the device! All data on the device will be lost! All secure browser data, including bookmarks,
downloads, configuration, etc., will also be erased.
To reset your Defender DualTrust to the factory default:
1. Start KDMDT.
2. When the login screen appears, click on the
reset
button.
3. When you are prompted to confirm the reset, click on the
Yes
button.
4. When your password and data stored on the secure partition have been erased, click on the
oK
button to complete the reset.
Logging into KDMDT
