This Kanguru DataBank is supported by the Mass Storage Device drivers in WIN ME/2000/XP systems directly .
You don’t need to
install any drivers
. If the Kanguru DataBank has been repartitioned by the user, please refer to the Partition the Kanguru DataBank
chapter to prepare your unit.
4.3 Mac OS
Step1
After the system boots up, insert the
Drivers CD in your CD-ROM.
Open the folder labeled “701 Kanguru Data Bank”.
Next open the “Drivers” folder.
Followed by the “USB Drivers” folder
Then open the “USB Mac OS” or the “USB Mac OS X” folder (depending on you OS)
Double click the “USB2.0 SETUP” icon, and
double click “USB installer” icon.
Step2
Click on “OK” when finished.
Step3
Restart your computer to finish
the driver installation .
Step4
After the restart, locate the USB
port for your Macintosh.
Step5
Connect the USB cable to your Macintosh.
Step6
Connect the USB cable to your Kanguru DataBank USB 2.0 External Drive.
Step7
The icon of USB2.0 drive will now be shown on your desktop screen and the drive
is now ready for use.
Tips:
The Kanguru DataBank USB 2.0 can be used to share information on both Windows and
Macintosh platforms. To set up your drive for cross-platform use, make sure you have the latest version of File Exchange Running on
MAC.
