32
Kangook Paramotors User Guide –
February 2020 – V3.0
Copyright 2020 All Rights Reserved.
Step 3: Harness and Swan Neck Attachment Arms connection for
Split Leg High Hook-In setup.
Be careful, this step is only intended for Split Leg harness users. Kangook Komfort
harness users must refer to page 27.
1 : Make sure that the components of the connector are
set in the right order (picture).
2 : Position the arm as in the picture.
Note
: for engines with belts, the small connector must be
placed on the left side of the chassis (pilot point of view).
The large connector must be placed on the right side.
3 : Tighten with the 13 mm spanner and the 6 mm
Allen key. Do it on both sides.
4 : Identify the strap as on the picture (red arrow).
