Assembly Instructions
Wallaby II
10
LIFT INSTALLATION WARNING:
DO NOT remove the small wooden block from the Lift until assembly is complete. If the block is removed or falls out
before lift assembly is complete, the cables will retract, making installation difficult. If the
block falls out before complete assembly, Call Customer Service during normal business hours
at 1-800-533-7347, ext. 1 for assistance, or visit www.arrowsewing.com/assembly-videos
and find the “Alternative Airlift Attachment Steps” video.
This illustration shows the back view of the Lift. Notice the
wooden block and zip tie; the wooden block holds the piston
in place so that the cables can be easily handled and inserted
into the Lift Rails installed on your cabinet.
3.5x14 Screw
x4
s1
A4
Attach the
Lift
to
Panel A4
using
s1 Screws
.
Step 4: Lift Panel
