Assembly Instructions
Kiwi
12
Part Two: Drawers
To reach the pre-drilled screw holes on the sides of
Panels K5 and K6
, you will need to tilt the drawer
runners.
Remove the front and back screws on the drawer
runners, leaving the middle screw installed. Pivot the
drawer runners to access screw holes as shown above.
Attach back
Panel K4
using
s3 Screws
.
Realign drawer runner and replace screws on drawer
runner as shown below.
Our customer service agents are ready to help! Call
us at 1-800-533-7347, ext. 1.
3.5x35 Screw
x4
s3
K3
K6
K5
K4