Assembly Instructions
Outback
25
Main Cabinet Step 4: Lift Installation
Guide
Lift
onto
Lift Rails
using plastic guides. Insert ends of cable into rail tabs; make sure the cable is hooked into the rail tabs
on both sides.
NOTE: See Page 26 for close-up illustrations of Lift Panel assembly.
Cut the zip tie on the wooden block, but DO NOT remove the block yet.
Lower the
Lift
to first lock position and remove the wooden block.
DO NOT ADJUST LIFT POSITION until the top is installed
, or
you risk the Lift coming out and cables becoming disengaged.
You will need to remove the Caddy from the cabinet at this time so that you can reach the necessary cam locks in Step 5.
