![background image](http://html.mh-extra.com/html/kangaroo/dingo-ii-k7905/dingo-ii-k7905_assembly-instructions-manual_652375013.webp)
Assembly Instructions
Dingo II
13
Part 2a: “L” Drawers
L1
L2
L1
L2
L
c5
L4
L1
L2
L
L1
L2
L
L3
s2
To reach the pre-drilled screw holes on the sides of
Panels L1 and
L2
, you will need to tilt the drawer runners.
Remove the front and back screws on the drawer runners, leaving
the middle screw installed. Pivot the drawer runners to access
screw holes as shown above. Repeat with remaining 6 drawers (7
total)
Attach
Panels L1 and L2
to
Panel L
as shown above.
Tighten cams and apply
c2 Cam Covers.
Repeat with remaining 6 drawers (7 total).
Slide drawer bottom
Panel L4
into the
grooves on
Panels L, L1 and L2.
Repeat with remaining 6 drawers (7 total).
Attach back
Panel L3
using
s3 Screws
.
Realign drawer runners and replace
screws on drawer runners.
Repeat with remaining 6 drawers (7 total).
5
⁄
8
“
Cam Cover
x4
c2
3.5x30 Screw
x28
s3