Aussie II
12
Assembly Instructions
5
⁄
8
“
Cam Cover
x4
180°
Step 14.
Panel A assembly.
1. Insert cam bolts
c1
on panel
A
into cams on panels
X
,
D
,
Y1
,
Y2
and
Z
and tighten in a clockwise direction as illustrated.
Apply cam covers c2 over tightened cams.
Step 13.
Mounting the Lifter Assembly.
1. Position lifter onto side rails using plastic guides; make sure the cable is hooked into the rail tabs on both sides then
lower the lift. See illustration below.
2. When lifter is pushed to first lock position remove a small wooden block that will be released from lifter.
Plastic guides
Cable
Lifter rail
Lifter rail
Rail tabs
c2
c5
Z
X
D
A4
Z
