Main Cabinet Step 4: Lift Panel
3.5x14 Screw
x4
s1
A4
Attach the
Lift
to
Panel A4
using
s1 Screws
.
Guide
Lift
onto
Lift Rails
using plastic guides. Insert ends of cable into rail tabs; make sure the cable is hooked into the rail
tabs on both sides.
NOTE: See Page 14 for close-up illustrations of Lift Panel assembly.
Cut the zip tie on the wooden block, but DO NOT remove the block yet.
Lower the
Lift
to first lock position and remove the
wooden block.
DO NOT ADJUST LIFT POSITION until the
top is installed
, or you risk the Lift coming out
and cables becoming disengaged.
Aussie II
13
Assembly Instructions
