KANEXPRO
SW-HDSC51HDBT
12 |
P a g e
3.3 Connection Procedure
Step1.
Connect HDMI source devices (e.g. Blue-ray DVD) to 1~3 HDMI input ports with
HDMI cable
Step2.
Connect a DisplayPort source device (e.g. MAC MINI) to DP input port with
DisplayPort cable and DP audio input port with audio cable.
Step3.
Connect a VGA source device (e.g. Laptop) to VGA input port with VGA cable
and VGA audio input port with audio cable.
Step4.
Select MIC level and connect right microphone to MIC input port. MIC audio will
be transmitted to AUDIO OUTPUT port and mixed with source audio.
Step5.
Connect a HDMI display device to HDMI output port with HDMI cable.
Step6.
Connect HDBaseT Receiver to HDBT output port with twisted pair.
Step7.
Connect speaker, headphone or AV amplifier to AUDIO OUTPUT port.
Step8.
Connect control device (e.g. PC, control system) to the TCP/IP port, the Scaler
Switcher can be controlled via web-based GUI.
Step9.
Connect control device (e.g. PC) to the RS232 port of the Scaler Switcher or the
HDBaseT Receiver (bi-directional RS232 control, either end is available).
Step10.
Connect IR receiver to the IR EYE port, the Scaler Switcher can be control via
IR remote. For more details, please refer to
4.2.IR Control.
Step11.
Both the Scaler Switcher and the HDBaseT Receiver have IR IN and OUT.
When one model is connected with IR receiver, the other model should connect
with an IR transmitter.
For example
: When “IR IN” of the Scaler Switcher connects with an IR receiver,
the IR transmitter must connect to IR OUT of HDBaseT Receiver.
The IR signal can be transmitted bi-directionally between
the Scaler
Switcher
and the HDBaseT Receiver.
Step12.
Connect DC24V power adaptor to the power port (HDBaseT Receiver can be
powered by the Scaler Switcher with PoH function).
Note: If the power adapter is connecting with the HDBaseT Receiver,
the Scaler
Switcher
can’t be powered from HDBaseT Receiver.
