HDSC31D-‐4K Collaboration Scaler Switcher
5
1.
POWER:
This LED will illuminate when the power is on.
2.
SOURCE:
Press the button to select the input source, and the LED will
indicates the corresponding input source.
3.
RESOLUTION:
Press the button to select the output resolution, and the LED
will indicate the corresponding resolution.
4.
DC 24V:
Plug the 24V DC power supply into the unit.
5.
IR IN:
Channel 2 IR Receiver. Connect with Wideband IR Rx.
6.
IR OUT:
Channel 1 IR Transmitter. Connect with Wideband IR Tx.
7.
HDBaseT OUT:
Standard HDBaseT signal output port. Connect HDBaseT
receiver with a UTP cable following the standard of TIA/EIA-‐568-‐B.
Green link LED:
The connection status-‐indicating LED.
※
Illuminate: Transmitter and Receiver well connected.
※
Flashing: Transmitter and Receiver poorly connected.
※
Dark: Transmitter and Receiver not connected properly.
Yellow data LED:
The data status-‐indicating LED.
※
Illuminate: HDMI signal with HDCP.
※
Flashing: HDMI signal without HDCP or unauthorized content.
※
Black or dark: No HDMI signal.
8.
HDMI IN:
HDMI input port. This port is where you connect the HDMI source.
9.
DP IN:
DisplayPort input port. This port is where you connect the DP source.
10.
VGA IN:
VGA input port. This port is where you connect the VGA source.
11.
RS-‐232:
Phoenix connectors provide Serial port control signal from transmitter
or to the transmitter.
