Once the Main controller (Sender) IP address is changed then you can
change the other sender and receiver IP address.
Note:
During changing Senders and Receivers IP address, you can see
their MAC address on the Web page (as below picture). Receiver will display
its own IP address and firmware version information on the corresponding
display. So, you would easily identify which Receiver you’re changing.
If all the sender’s are connected at the same time, each sender’s ip address
need to change as per the Mac address labeled at the bottom of the housing.
Otherwise, connect each sender at a time and change the IP address accordingly.
SETUP
R
14
EXT-NETAVRX_V1.0
