HDBaseT 2.0 KVM Extender Set
5
e)
Send RS232 commands to control the third-party device. For more details
about RS232 commands, please refer to the user manual for the third-party
device.
Step6.
Connect with DC12V power adaptor to the power port of either Transmitter or
Receiver; the other end will be powered synchronously via PoH.
&
1)
System Diagram shown in this manual is for reference only, more specific
schemes depend on real-time applications.
2)
Connect HDBT ports via straight-thru CAT5e/6 cable with TIA/EIAT568B standard
terminations at both ends.
3)
RS232 communication protocol: Baud Rate: 9600; data bit: 8; stop bit: 1; parity:
none. HDBT Transceiver receives RS232 control from devices with various baud
rate (2400, 4800, 9600, 19200, 38400, 57600, 115200).
4)
HDBT ports can work with existing KanexPro HDBT products that have same
power supply solution.
5)
Make sure the switchers on front panel are in the necessary status.
6)
Reboot the device if the switcher status has changed.
3.4 PoH (Power over HDBaseT)
HDBaseT Transceiver boasts HDBT port, which supports PoH. Besides carrying
uncompressed 1080p or 4K video signals, USB or RS-232 control signals over a single
Cat 5e/Cat 6 cable, it transfers DC power over a single Ethernet cable to a distance up
to 100 meters (m) bi-directionally.
Connect the DC adapter to either the transmitter or the receiver; the other end can be
powered synchronously (see in the following figure):
DC 12V
Transmitter
Receiver
PoH
