KanexPro HDMMX3232-4K Series Modular Matrix Switcher (with Audio)
8
2.2.2. MOD-IN-DVI & MOD-OUT-DVI
Seamless DVI signal card. (
Please check the specification from 5.2.2
)
It is fully compatible with HDMI1.3& HDCP, and supports seamless transmission for
high-definition DVI, HDMI, VGA, AV, YPbPr signals. Signal format can be modified via
RS232 commands.
It boasts embedded EDID management (only for HDMI/ DVI signal), supporting DDC.
4I-DS
: seamless input card, maximum four input signal. It can automatically identify the
format of input signal. Input signal can pass to output device through 4O-DS, or other
kinds of output cards.
4O-DS
: seamless output card, maximum four output signal. Automatically recognize
output signal (HDMI/ DVI), and output resolution is adjustable. Output signal can come
from 4I-DS, or from other kinds of input cards. It supports off memory for resolution,
signal format, HDCP compliant status.
Note:
1. When 4O-DS works with input cards except 4I-DS, to ensure reliable seamless
output, adjust the input signals to any one of the following 5 resolutions: 1024x768,
1280x720, 1600x1200, 1920x1080, 1920x1200.
2. Before using 4O-DS, upgrade the front-board and backboard of MMX88A. Seek
technical assistant from our technical supporters.
3. DVI interfaces on the signal card are same with the interfaces on 4I-DV& 4O-DV.
Pin C1~C5 are used in 4I-DS & 4O-DS.
When connecting to VGA, YPbPr or C-VIDEO signal, insert converting cables
according to specific pin definitions (see the figures below):
DVI-
C-VIDEO:
Pin
Signal
C1
Yellow
C5
GND
Other pins are unused.
