background image

Hotkey functions; 

1.4-Bluetooth mode setting keys 

    BT1, BT2, BT3, BT4 4 keys located at upper-right area which they are for setting connect with 4 devices each. 

Also they have a white color LED against each keys. 

a.

Short press the BT mode key that the key will be setting to in this against mode to connect devices. Then the

LED will be blink a time.

b.

When long press the BT mode keys with 3 seconds, its mode function will become pairing mode for waiting

connect device, once it finished to connect the devices, the LED will blink 15 seconds then off.

2.Others normal keys;

You can follow first column keys function to operate its function of BT-7308 well under Mac OS. 

LED signal description (from right to left) 

LED1, LED2, LED3, LED4

all white color 

When you short press the BT mode key that the key will be setting to in this against mode to connect devices. Then 

the LED will be blink a time. 

When you long press the BT mode keys with 3 seconds, its mode function will become at pairing mode for waiting 

connect device, once it finished to connect the devices, the LED will blink 15 seconds then light off. 

You can swap the BT1 to BT4 key with each devices as you connect mode. 

Battery low status: 

 

During the typing time, each BT mode key LED have continually blink, it represent its battery is a low power 

situation, you have to change new battery immediately. 

Calslock

 

Inside the capslock key, it have a white color LED for indication upper-case letters status when it be light on status. 

One/Off power switch 

On/Off slider switch which locate in back side of Keyboard unit, when the slider switch have turn on, the power will 

be lighted on. When you turn off the slider switch, the power will be lighted off. 

  (** suggest you turn off the battery power for saving batter power consumption, if you don

’t use keyboard for long 

time) 

How to Operating: 

Before you starting use this keyboard, please detail READ below operating information; 

(Notice:Please use enclose AAA alkaline battery or another new battery you have for keep full power before you first 

time use BT-7308 keyboard unit) 

Connect to Bluetooth host devices; 

1.Take out BT-7308 keyboard unit from package box

Summary of Contents for K166-1013






Reviews: