INSTALLATION INSTRUCTIONS
Before Using Your Wine Cellar
Remove the exterior and interior packing.
Before connecting the Wine Cellar to the power source, let it stand upright
for approximately 2 hours. This will reduce the possibility of a malfunction
in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
When disposing your appliance, please choose an authorized disposal
agent.
Installation of Your Wine Cellar
This appliance is designed for free standing installation.
Place your wine cellar on a floor that is strong enough to support it when
it is fully loaded. To level your wine cellar, adjust the front leveling leg at
the bottom of the wine cellar.
Locate the wine cellar away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the foaming case
and heat sources may increase electrical consumption. Extreme cold
ambient temperatures may also cause the unit not performing properly.
Avoid locating the unit in moist areas.
Plug the wine cellar into an exclusive, properly installed-grounded wall
outlet. Do not under any circumstances cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an authorized
products service center.
Attention
Store wine in sealed bottles.
Do not overload the cabinet.
Do not open the door unless necessary ; door frequently opened would
influence its operation.
Do not cover shelves with aluminum foil or any other shelf material
which may prevent air circulation.
Should the Wine cellar not being used for a long period of time, it is
suggested that, after a careful cleansing, leave the door opened to allow
fresh air circulates inside the cabinet. This will avoid possible formations
of condensation, mold or odors. But always prevent child entrapment.