11
KANE 458s MANUAL
FIRST TIME USE
Charge your analyser batteries for 8 hours - an overnight charge should
be sufficient for an average 8-hour day.
Take time to read this manual fully and be aware your analyserÏ
configuration may not support all features explained in this manual.
Before using your analyser set it up for your requirements.
NOTE: Your analyser STATUS bar displays current time, date and
battery status - Check time & date are correct as they can only be
changed if you have not stored any logs in Memory to protect the
integrity of your stored data.
GENERAL OPERATING PRINCIPLE
Using your analyser is simple with the rotary dial and user interface.
Most tests can be made with little user activity.
Your analyser status bar offers options based on tasks you are
performing, displaying useful information and messages.
QUICK START
Turn on your analyser pressing the button for 2 seconds until it starts.
Your analyser starts a calibration - once completed select your tests by
turning the analyser rotary dial.
USER INTERFACE
Your analyser display shows 5 lines of tests & a status bar. The backlight
activates on each button press then turns off after 10 seconds.
Navigate through your options and menu choices via &
.
Button presses are either short or long presses.
