Page 2
IMPORTANT SAFETY INSTRUCTIONS
•
Read all instructions.
•
Please take care when handling the probe as it may be hot
•
Ensure equipment or any electrical cables are free from damage
•
Please beware of cables coming in contact with rotating engine
parts or other moving components
•
Allow the AUTO600 to cool before storage
•
The AUTO600 extracts exhaust gases that may be toxic in
relatively low concentrations. These gases are exhausted from the
top and the base of the AUTO600 base unit.
•
Use in an adequately ventilated area
•
Ensure the test vehicle is at normal operating temperature before
carrying out an opacity test
•
Due to the nature of the opacity test ensure the vehicle being
tested has been properly maintained. Kane take no responsibility
for any damage caused to a vehicle as a result of the testing
process.
•
Clean the exterior of the product with a damp cloth only. Do not
use solvents of any kind.
SAVE THESE INSTRUCTIONS