Kandolite KLB54W3RGBAW, User Manual

Page: 11 / 19

DMX Dimming mode
DMX Dimming Mode ： Dimming mode0-4 ， Mode 0 is output directly 。
Operation
：
ENTER+UP/DOWN+MENU
Build-in RGBAW dimming mode
Dimming mode: RGBAW dimming 0-255 ， 0 is close ， 255 is brightness
Operation
：
ENTER+UP/DOWN+MENU
Operating Control Instruction
Master/Slave
Master ： The master should always working as a master as long
as it is not set in a DMX mode whatever other modes it
is. And it send out the signal so that the slave
synchronous with it. To avoid the host signal and
DMX512 signals interfere with each other, should cut off
the DMX512 signals. The signal lines are longer than 60
meters(20 lamps) ,should increase a signal amplifier.
Slave ： he Slave must be set in DMX mode and the address code
should be A001, to assure receive the master’s signals
correctly. Only one light can be set as a Master and others are
slaves.