•
At last, press ENTER to confirmed and choose the working mode. The
panel will auto closed if no operation for 15 seconds. Press any button to
active it.
Details of program built inside
（
（
（
（
Pr- -
）
）
）
）
Pr00:Red:
Pr01:Blue: Pr02:Green
；
Pr03:Amber:
Pr04:White Pr05:Red+Blue+Green
；
Pr06:White+Amber:
Pr07
：
Mode 1 Pr08
：
Mode 2
Pr09
：
Mode 3:
Pr10
：
Mode 4 Pr11
：
Mode 5
Pr12
：
Mode 6: Pr13
：
Mode 7 Pr14
：
Mode 8
Pr15
：
Mode 1-8
Remark:
Pr07----- Pr15 adjust the speed SP00 is fastest
，
，
，
，
SP15 is slowest
Operating Control Instruction
Master/Slave
Master
：
The master should always working as a master as long as it is not
set in a DMX mode whatever other modes it is. And it send out
the signal so that the slave synchronous with it. To avoid the host
signal and DMX512 signals interfere with each other, should cut
off the DMX512 signals. The signal lines are longer than 60
meters ,should increase a signal amplifier.
Slave
：
It must be in the SLAV mode and the address code should be
A001 to assure receive the master’s signals correctly. Only one
light can be set as a Master and others are slaves.
