KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
26748-021-55 Rev.02 03-80-809-00 11/20
26748 Monitor Plate S
INTENDED USE
- The monitor plate serves to rest your monitor boxes.
-
Thanks to the four boreholes the suited monitor boxes can be screwed in place
- With 3/8" and 5/8" threaded bush for mounting on suitable carriers
-
(stands or brackets)
FEATURES & CAPABILITIES
- An appealing functional design
- Durable quality - 4 mm thick aluminium
- 4 self-adhesive rubber studs ø 13 mm
- Plate: 170 x 150 mm, thread adapter: 1. M6 - 5/8", 2. 5/8" - 3/8", weight: 0,4 kg
SAFETY INSTRUCTIONS
Thank you for choosing this product. Please read and follow the instructions carefully. They inform you
about all the important steps concerning assembly and handling. We recommend you to keep them for
future reference.
A. LOAD CAPACITY OF THE INSTALLATION
A.
The maximum allowed load is based on the proper condition, treatment and functional interaction
A.
between the components (
B
,
C
,
D
,
E
,
F
,
G
).
B. MONITOR PLATE 26748
B.
- off-centre loading represents a hazard and is not permissible
B.
- The plate must always be in horizontal position
B.
- The plate should always be firmly screwed to the support (stand/bracket) free of play
B.
- The position of the rubber studs should be aligned with the shape of the monitor
B.
-
(affix close to the edge)
C. STAND
C.
- The stand should have a suitable connection thread (3/8" or 5/8" threaded bolt)
C.
- The safety instructions of the stand must be observed
C.
- Place the stand on an even and sustainable flooring
C.
- Load capacity:
C.
-
c.1
- do not exceed the nominal load specified by the stand manufacturer
C.
-
c.2
- the stand should not deform under load nor the mounted monitor plate tilt
B
C.
-
c.3
- the telescopic tubes should not retract under load - when clamping elements are tight
D. SUPPORT
D.
- The support must have a suitable connection thread (3/8" or 5/8" threaded bolt)
D.
- The safety instructions of the support should be observed
D.
- The support (e.g. 18817, 44500) must be fixed in a manner that when loading the horizontal
D.
-
position of the monitor plate
B
is not endangered (e.g. to the Omega / the wall).
D.
- Load capacity:
D.
-
d.1
- Do not exceed the manufacturer's specified nominal load
D.
-
d.2
- Under load the support should not deform nor should the mounted monitor plate
B
tilt
E. MONITOR BOX
E.
- The monitor box should suit the monitor plate
B
.
E.
-
Please observe: -appropriate, i.e. reasonable extension, -admissible weight,
E.
-
-even surface, -centred CG
E.
- If necessary, the stand plate may be screwed to the monitor housing.
E.
-
Please contact the manufacturer.
F. SURROUNDINGS
F.
- External influences caused by personnel, the public, weather conditions etc.
F.
-
(pushing, pulling, vibrations, wind forces) should be avoided or prevented
G. HANDLING
G.
- Also carry out a visual inspection during monitor operation to ensure that the monitor is still
G.
-
correctly positioned (vibrations!).
G.
- When working on the stand (e.g. changing the height) the monitor box should be removed
G.
-
from the monitor plate.
INSTRUCTIONS FOR INSTALLATION / USE
1. COMPONENTS
Please carry out a visual inspection to ensure that all parts are complete and in order - as far as
recognizable.
a
Monitor plate aluminium 170 x 150 x 4 mm with threaded bolt M6 x 16 mm
a
Accessories bag:
b
4x rubber studs ø 13 x 1.6 mm, self-adhesive
c
Reducing thread 1. M6 - 5/8" - already screwed with...
d
...reducing thread 2. 5/8" - 3/8"
2. ASSEMBLY
2.1
Screw the thread adapter
c
,
d
to the monitor plate
a
all the way to the stop.
2.2
Take the monitor plate and place it on a suitable support (stand or bracket -
SAFETY
2.2
INSTRUCTIONS C
,
D
) and screw together using a 3/8" connection thread...
2.2.1
...all the way to the stop.
2.2.2
PLEASE NOTE: In many cases this stop consists of a knurled disc on the stand or support.
2.3
If the support has a 5/8" thread, the thread adapter
c
must first be removed,
2.3.1
then the monitor plate can be screwed on...
2.3.2
...all the way to the stop.
2.4
Glue the 4 rubber studs
b
onto the monitor plate close to the edge – based on the shape of the
2.4
monitor. Inappropriate placement of the rubber studs can jeopardise the stability of the monitor.
3. SETTINGS
NOTE: Before changing the position of the monitor plate please remove the monitor box.
3.1
ALIGNMENT
3.1
If the screwed monitor plate points in an unwanted direction, this can be corrected as follows:
3.1.1
turn the monitor plate back until it is aligned as desired.
3.1.2
turn the knurled disc against the threaded bush of the monitor plate as far as it will go and
3.1.2
tighten it, so that the monitor plate is secured against wobbling and unwanted turnaround.
3.2
HEIGHT and DISTANCE of the monitor plate can be adjusted on the stand or support.
MAINTENANCE, CARE, REPAIR
- When carrying out such activities please pay attention to possible hazards (bumping, tilting)
- For cleaning use a slightly damp cloth and a non-abrasive cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Monitor plate wobbles or twists unintentionally
F:
R: Tighten the threaded socket of the monitor plate and the lock nut (knurled disk)
F: Support (stand or bracket) wobbles
F:
R: Level uneven surface, check carrier, tighten screw connections
1. COMPONENTS
2.1 MOUNTING THE
2.1
MONITOR PLATE
CARRIER
- Stand
- Support
2.2 3/8"-THREAD
2. ASSEMBLY
2.3 5/8"-THREAD
2.4 RUBBER STUDS
3.1 ALIGNMENT
3. SETTINGS
