6
7
24195 Speaker Mounting Brackets
Important notices
Make sure that the wall is suitable to carry the weight of the bracket and the speaker
(
load capacity up to 15 kg!
).
The screws for attaching the bracket to the wall or ceiling are not included. Please use
screws suitable for the ground.
The speaker brackets are designed for indoor use. Please do not install the brackets
outside.
Please make sure that every screw is tightened.
König & Meyer takes no responsibility for wrong application or installation causing
accidents or damages.
Mounting instructions
Please attach the wall mount
9
to the wall using appropriate screws and plugs.
Attach the speaker using the screws
7
and the washers
6
to the speaker plate
1
.
Please attach the additional wire rope
5
with the angle
4
on the speaker for more
security.
Adjustment of the speakers
Direction:
Please loosen the hexagon screw
2
with the wrench
3
- do not unscrew completely -
turn the speaker in the desired position and tighten the hexagon screw
2
again.
Inclination:
Please loosen the cap nut
11
with the wrench
3
- do not unscrew completely -
until
the swivel joint
10
is turnable. Fasten the cap nut
11
when the desired position is
adjusted.
Please take care that the teeth of the swivel joint are fitting together.
1
1
3
11
10
2
3
4
5
1
6
7
8
9
Direction adjustment
Inclination adjustment
-24195.000.55- / -24195.000.57-
-03.80.735.00- 2/04