KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14032-000-55 / 14033-000-55 Rev.07 03-80-656-00 10/17
TECHNICAL DATA
Material
Backrest, adjustment bracket: Steel, powder coating, black
Connection elements: Steel, galvanized
Guide bracket, handles: PA, black
Backrest cushion: imitation leather or fabric, black
Dimensions
Backseat cushion: 400 x 235 mm; Backrest: 430 x 185 x 45 x 6 mm
Box
470 x 325 x 90 mm
Weight
gross: 2 kg, net: 2.35 kg
14032/33 Backrest
- a useful addition to several:
-
K&M-Drummer thrones, -Sstools, -piano- and -stage stools
- easy to setup and break down, great for on the road
- height and depth adjustabl
SAFETY NOTES
Thank you for choosing this product. The instructions provide directions to all of the
important set up and handling steps. We recommend you keep these instructions for
future reference.
- Prior and after use the stand should undergo visual inspection, to ensure that all compo-
-
nents are there and to ensure that the product is in working order, to the extent visible.
- Damaged stands may not be used i.e. they must undergo a repair by a qualified technician.
- The option to adjust various settings on the product can result in the risk of pinching/
-
wedging your fingers. Careful and attentive handling during setup, operation and
-
disassembly is indispensable.
- Tighten the clamp screws - without the use of tools.
-
Manual strength is enough, over-tightening can negatively affect the components.
- Only to be used indoors
COMPONENTS
1
Backrest cushion with threaded bolt -
2
Backrest -
3
Accessory bag:
a
Guide bracket
b
Clamping screw M8 x 18 mm -
c
washer ø 8,4 mm (2x) -
d
Clamping nut M8
4 a
14015/16
Drummer's
throne
-Seat rotates-
4 b
14052/53
Stool
14055/56
Drummer's
throne »Nick«
-Seat rotates-
INSTALLATION & FUNCTION
SELECTION of the SEAT (4 a-e)
4
The backrest was designed for K&M Drummer Thrones:
4 a-d
14015/16, 14044/45, 14046/47, 14052/53, 14055/56 und 14060/61
4 a-d
as well as the piano and stage stools:
4 e
14092-017-55 und 14094-017-55
4 e
The required U holding bracket is located on the bottom of the seat cushions
ATTACH THE BACKREST
5
Clip the guide rail
3 a
to the short section of the L-bracket
2
.
5
(BEACHTE: NICHT benötigt wird die Führungsleiste für Sitze der Kategorie
4 e
)
6
The connection is good if:
5 a
...the guide rail and the L-bracket are lined up properly
5 b
...both of the guide rail knobs fit into the two drill holes of the L-bracket
5 c
...the four barbs click into place on the L-bracket
6
The bolt of the backrest cushion
1
is placed through the slit in the L-bracket
2
.
6 a
To ensure that the backrest cushion does not twist and remains in a horizontal
6 a
position, both knobs must be placed in the L-bracket slit.
6 b
Now place the washer
3 c
and securely tighten the wing nut
3 d
6 c
The rounded section of the backrest cushion
1
faces upwards.
7 c
The cushion may also be turned 180° and attached.
ATTACH THE BACKREST TO THE SEAT
7
Place the short section of the L-bracket in the holding bracket below
7
the seat cushion.
8
Now coming in from below place the clamping screw
3 b
with the
8
washer
3 c
into the long slit (
4 a-d
) or one of the two holes
4 e
of the
8
holding bracket into the female thread of the L-bracket and tighten.
POSITION THE BACKREST
1
9
Height: Loosen the wing nut
3 d
somewhat and place the
19
Height
:
backrest in the desired position. Re-tighten the wing nut.
10
Depth: For seats
4 a-d
: Loosen the clamping screw
3 b
somewhat and place
10
Depth:
the L-bracket in the desired position. Re-tighten the finger screw.
10
Depth:
For seats
4 e
: Loosen the clamping screw completely and use the
10
Depth:
other of the two holes in the retaining clamp of the seat.
FAULT-FINDING (F) and REPAIR (R)
F: The backrest is not stable: R: Tighten the clamping screw
8
F: Rückenlehne wackelt:
R: The guide is not installed properly? (refer to
5 a
,
b
,
c
)
F: Rückenlehne wackelt:
R: Tighten the holding bracket underneath the seat
F: Rückenlehne wackelt: R:
cushion
F: The backrest is not stable and twists:
F: Rückenlehne wackelt:
B: Tighten the wing nut
6 b
F: Rückenlehne wackelt:
B: Both knobs
6 a
,
6 b
must disappear into the slit
MAINTENANCE
- In the event of workstation maintenance pay attention to possible risks
-
(wedging or pinching of fingers)
- To care for the product, use a damp cloth and a non-abrasive cleaning agent
COMPONENTS
SELECTION
of the SEAT
ATTACH THE BACKREST
ATTACH THE BACKREST TO THE SEAT
POSITION THE BACKREST
Beutel
Karton
Adjustment
Area
Height
Depth Adjustment
(Seat:
4 a-d
= 40 mm
(Seat:
4 e
-d
= 20 mm)
4 c
14044/45
Stool
14046/47
Pneumatic
stool
-Seat tilts-
4 d
14060/61
Stool
-Seat tilts-
4 e
14092
Piano stool
14094
Stage stool
-Seat rotates-