REAR PANEL FUNCTIONS
1.
A/C INPUT
- Connects the amplifier to A/C power via the power cord
supplied. Unless otherwise specified, your amplifier is designed to operate
on 120 volts A/C, 60 cycles.
2.
FUSE
- 3 AG Type, slow blow fuse. Refer to the legend below the fuse holder
for the proper fuse rating for your amplifier. (50 watt-2.5 amp /100 watt-
3.5 amp)
3.
POWER SWITCH
- Turns the power on.
4.
INPEADANCE SELECTOR
I
5.
SPEAKER OUTPUT JACKS
- There are 2 speaker output jacks
NEVER OPERATE YOUR AMPLIFIER WITHOUT A PROPER SPEAKER
LOAD CONNECTED. Be sure to match the impedance of your cabinet with
the impedance (output) of the amplifier.
6
EFFECTS SEND
- Use this jack to send the amplifiers signal to outboard effects.
7.
EFFECTS RETURN
- Use this jack to connect the output of your effects to the
amplifier.
Page 4
Two-Rock, CA
1
2
3
4
6
7
A/C 120 VOLTS
60 CYCLES
FUSE
2.5 AMP
SLO-BLO
SPEAKER OUTPUTS
4
16
SEND
RETURN
EFFECTS LOOP
K&M Analog Designs
Manufactured by:
MADE IN U.S.A.
S/N
8
POWER
Two-Rock, CA
5
