K&H SIN-1801, User Instruction Manual

Page: 8 / 9

8
TECHNICAL INFORMATION
Voltage: 120V~ 60 Hz
Model: SIN-1801
Max. power: 1800W
CLEANING
Ÿ Do not use steam cleaners.
Ÿ Before cleaning, make sure the cooking zones are turned off and residual heat indicator (“H”) is
not displayed.
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.
Ÿ After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.
Ÿ Sugar or foods with a high sugar content damage the hob and must be immediately removed.
Ÿ Salt, sugar and sand could scratch the glass surface.
Ÿ
Use a soft cloth, absorbent kitchen paper or a specific hob cleaner
Ÿ Any other servicing should be performed by an authorized service representative.
TROUBLESHOOTING GUIDE
Ÿ Read and follow the instructions given in the section “Instructions for use”.
Ÿ Check that the electricity supply has not been shut off.
Ÿ
Dry the hob thoroughly after cleaning it.
Ÿ When cooktop is turned on, if error codes appear on the display, consult the following table for
appropriate action.
Error
code
Possible Cause Remedy
E0 No Pan or did not detect the pan Put on compatible pan
E2 NTC short or open Call the after-sales service and specify the error
code
E3 High voltage Call the after-sales service and specify the error
code
E4 Low voltage Call the after-sales service and specify the error
code
•
C/CC Error: automatic safety shut-off for liquid overflow